Skip to content
In the concrete business since 2017 (708) 740-5612
Countryside Concrete Contractor logo
Close-up of a smooth concrete driveway slab with control joints

Driveway replacement

Concrete Driveways in Countryside, IL

Old drive out. Ground dug and packed. New concrete at the right depth for what you park on it.

A Driveway That Can Take the Weight

Your driveway takes the hardest beating of any concrete you own. Daily car weight. Salt dripping off the wheel wells all winter. Freeze, thaw, freeze again. When a driveway fails early, it is almost always because of what is under it. Too thin. No base. Soft clay left in place. We fix that by starting over. The old driveway is broken out completely and hauled away. We dig to firm soil and remove anything soft. Crushed stone is spread and packed in lifts. Daily-driver cars do fine on roughly 4 to 5 inches. Got a heavy pickup, a box van or a trailer? Then we go thicker and add reinforcement where the weight lands. The surface is pitched so water runs to the street or a safe outlet, not toward the garage. The end at the street is tied in clean so there is no lip to bump over. Control joints are cut so any cracks stay straight. And you get clear instructions on when it is safe to walk on it and when it is safe to drive on it. Parking too soon is one of the fastest ways to damage new concrete.

What Driveway Replacement Includes

Straight or curved, short or long, these are part of every one.

  • Complete tear-out

    Old concrete broken up and hauled away. Never poured over.

  • Dig to firm soil

    Anything soft or full of roots gets dug out first.

  • Packed stone base

    Spread and compacted in layers for even support.

  • Depth for your vehicles

    Standard for cars, thicker and reinforced for trucks and trailers.

  • Drainage pitch

    Water directed to the street or an outlet, away from the garage.

  • Clean street tie-in

    No bump or lip where the drive meets the road.

  • Cure-time guidance

    Clear dates for when to walk and when to drive on it.

Driveway Replacement Step by Step

  1. Measure and price

    We measure, check drainage and ask what you park. You get removal, base, depth and finish in writing.

  2. Break out and prep

    Old drive removed, ground dug and packed, forms set to grade.

  3. Pour and protect

    Concrete placed, finished and jointed. Barricaded while it cures. Site cleaned.

Why Our Driveways Stay Flat

  • We ask what you drive

    The depth fits your vehicles, not a one-size number.

  • Base gets the most effort

    Excavation and compaction are where a driveway lives or dies.

  • Straight talk on cure time

    We tell you exactly how long to wait before parking.

  • Full removal of the old drive
  • Depth matched to vehicles
  • No lip at the street
  • Barricaded while curing

Driveway Cracked, Sunken or Crumbling?

Tell us the size, what you park and what condition it is in. We will go over replacement and price on the call.